5 posts · March 23, 2020 to May 21, 2020 · Archived from the original AirgunWarriors.com forum
This page preserves a discussion thread from the original AirgunWarriors.com community forum, reproduced here as originally written. If you're a contributor to this thread and would like something removed or credited differently, contact info@airgunguide.com.
Trying to see if anyone has info....
I looked at the world bench rest rules, but cannot find if there is a standard height for a bench rest table.
It only describes that the target is supposed to be higher than the table.
Interested to see if there is a standard height followed by clubs.
World standard is 32 inches | 812mm
Great! Thanks for the info... Exactly what I needed..
F.3 Range –Benches:
The range must be equipped with adequate benches to cope with the numbers expected at the Championship.
No international standards have been developed on size, spacing etc
I've been shooting benchrest for almost 30 years at clubs all over the nation... typically between 30" and 34". most are around 32"
WBRAF · Regulations · Benchrest