About an inch into the spring compression I get a click. Other than that everything is normal. Any ideas?
This page preserves a discussion thread from the original AirgunWarriors.com community forum, reproduced here as originally written. If you're a contributor to this thread and would like something removed or credited differently, contact info@airgunguide.com.
About an inch into the spring compression I get a click. Other than that everything is normal. Any ideas?
Check the thrust washer for nicks.
Polish BOTH ends of the spring if you do not have a TIGHT TopHat at the front. If you do, then ensure that the rear end is well polished as well as both sides of the thrust washer.
Check the guide for nicks and scratches
Of course, check the spring
Check also that the trigger is returning to its position (the REAL reason why that trigger has an independent return spring).
Check that the cocking linkage is working properly and tight.
HTH
HM
I can do that. Thanks.
Tags
Walther · LGV · Springer